Teach you a recruit to extend the service life of the junction box electric ark cabinet control box!
Cabinets should be how to clean up?

The characteristics of the cabinet?
1. Door plank is high from the ground, to ensure that the flexible smooth to door
2. Fifty percent of the body of the profiles can be connected with the overall framework to ensure the strength of cabinet put oneself in another's position and achieve IP55 protection grade
3. The door plank of square tube reinforcement can be screwed on the door, to facilitate disassembly
4. The frame with 25 mm spacing module hole to ensure that the installation of adjustable
5. Galvanized plate using plastic slider by rail from the front into the box, and both sides have U ruffled the mounting plate is more strong and easy to handle
How to maintain cabinet?
1. Cabinet with pickling phosphating surface treatment, electrostatic plastic spraying baking. Surface disposal technology is divided into two kinds of indoor and outdoor plastic powder.
2. Cabinet interior type placed in dry and ventilated place to plastic powder dry not fall off. Environmental moisture % & within 0 can be normal use.
3. Cabinet outdoor plastic powder can be placed for a long time in salt more occasions in the damp air
KEALA teach you cabinets should be how to clean up?

The mainboard to clean up
As the basis of the entire device hardware, it is easy to accumulate dust. Clean the mainboard, remove the plug-in, dismantled fixed motherboard screw, remove the main board, brush with wool brush to all parts of the dust. Operation, power wants moderate, so as not to damage the surface patch components. If too much dust, usable and anhydrous alcohol to clean. If the motherboard has a temperature measuring device, to be protected in advance. If the slot in the blower to clean dust too much available.
2, the fan clean
Fan blades are generally accumulated a large number of internal and external coating, brush with wool can withstand leaves one by one by hand wiped the dust on the blade, then fan and fan frame inside with a wet cloth to wipe. Can also add some lubricating oil on its axis in order to make the performance and reduce the noise.
3, on the surface of the box body clean
For dust on the surface inside the case, can use wet cloth to wipe dry. Wet cloth should try to do it carefully and avoid residual water stains, wipe out should use the hair dryer to dry.
4, the outer plug and socket clean
General use brush to clean up first aggradation, use hair dryer clean again. If there is oil pollution, usable cotton wool ball with anhydrous alcohol to remove.
5, power clean
Power is very easy to dust collecting equipment, but also affected by temperature. Disassemble the power when it is important to note that the internal high pressure, if there is no certain knowledge, don't be opened. If not apart, can use the hair dryer is strong file to blow out the power supply into the dust, and scrub brush through the fan filter cleaning fan blades.