Carla Hardware Aluminum Alloy Control Box Processing Technology

                    KEALA

What is the processing technology of aluminum alloy chassis? At present, the aluminum alloy chassis used in industrial production in various countries in the world are made of non-ferrous metal aluminum plates. The aluminum material does not lack hardness on the basis of lightness. Formed by sheet metal processing, the box has high compressive strength after forming and can maintain a beautiful appearance. The use of sheet metal equipment can maintain mass production of various aluminum alloy chassis or aluminum alloy shells, thereby reducing the weight of the chassis and increasing aesthetics. Well, the processing technology of aluminum alloy chassis mainly has the following aspects:

On the one hand, laser cutting, opening, bending, installation and forming

Use the national standard 5 series or 6 series aluminum sheet according to the demand, program the CNC cutting to process the unfolded workpiece before the chassis is formed, the hole position has been programmed in the engineering design, and the positive and negative tolerances of 0.5mm range are used according to the corresponding size. The standard parts inside can be formed by installing screws and nuts on the corresponding holes and holes.

On the other hand, laser cutting, opening, bending, welding and forming

Use the national standard 5 series or 6 series aluminum sheet according to the demand, program the CNC cutting to process the unfolded workpiece before the chassis is formed, the welding holes have been programmed in the engineering design, and the positive and negative tolerances of 0.5mm are folded according to the corresponding size using CNC The standard parts within the scope are welded and spliced by argon arc welding at the connection points, and then need to be polished and polished. According to the surface requirements, wire drawing oxidation is performed.

Due to the high quality of the welding forming characteristics and the strong plasticity of the design concept, a welded aluminum alloy chassis can replace the aluminum alloy shell formed by the installation of multiple workpieces and screws. Therefore, the distortion and deformation caused by electric welding will require better welding equipment. Welding technology is high, its key advantages are: improve quality,

Save raw materials.

Therefore, after the production and processing of the aluminum alloy shell is finished, the surface treatment is completed. The general surface treatments are: polishing, sandblasting, metal brushing, paint spraying, surface anodizing treatment and staining agent, surface repair Rong sanding production and processing solutions, electroplating process, screen printing ink, hot stamping, etc., the above is to introduce you to the processing technology of aluminum alloy chassis

                    KEALA