Electrical control cabinet is a very important equipment in the construction of power system. It mainly plays the role of power supply control and power transmission, distribution and power transmission. It can be said that it is the core part of the whole power system. So the control cabinet assembly process is a very important link in the power system construction.
Equipment inspection, painting, screen printing
When each component of the equipment arrives at the assembly workshop, the assembler needs to take the drawing to check whether all the electrical cabinets, electrical floor, electrical panels, button boxes, electrical accessories and other dimensions are suitable and the quality is qualified. Whether the size of the pre-set wire hole in the control cabinet assembly is appropriate, after the inspection is correct, the electrical assembler needs to carry out the process of painting and plastic spraying, and the electrical panel needs to be screen printed.
Ii. Prepare all materials for control cabinet assembly
In addition, before the electrical control cabinet assembly, it is very important to prepare all the materials for assembly, including all kinds of equipment, components and accessories needed for assembly, and also to prepare the tool kit, which contains various assembly tools such as screwdriver, pliers, drill bit, spanner, etc.
3. Install electric floor
Measure the length of the wire groove and guide rail according to the soleplate layout in the electrical drawing, and cut with the saw bow. It is necessary to note that the wire groove should be placed in a flat place, the guide rail should be clamped in a vice saw, and the seam should be flat. After finishing the saw, grind straight on the grinding wheel, and make a fixed hole on both ends of the line groove and guide rail with the hand electric drill. Arrange the groove and guide rail on the base plate according to the design drawing, and mark the position with marker pen.